Gypsum Board Cutter

Determine your measurement, then transfer Gypsum Board Cutter to your drywall, let's make drywall cutting work easier. A must-have gypsum board cutter tool is ideal for cutting the drywall as well as floor tile & ceiling tile, collection for you to improve your work efficiency.

Gypsum Board Cutter consists of two parts, upper and lower, in each one is a very strong magnet, by means of which they are held together. In the center of each is located on the cartridge with a removable blade, clean cutting without dust, or rough edges.

Rare-earth magnets pull the halves toward each other while hinged plastic tabs keep the two halves apart—just enough room to slide the tool onto a sheet of drywall. Two magnetic halves mirror each other cutting both sides of the drywall at the same time, cuts curves arches, and odd shapes fast and neat.

Gypsum Board Cutter works with 1/2'' or 5/8'' board, it allows any cut lines in a sheet of plasterboard simultaneously from two sides without restrictions, it can cut 90-degree corners in one pass and can also cut curves, corners, shapes, and straight lines with ease.

Built-in magnetic and utility blades allow you to get professional results in less time. The double handle design makes cutting safer, labor-saving, convenient, and comfortable. Cutting clean, no burrs, and no dust. No more messy cutting lines, and no more need for straight edges!

GUIDE TO USE

✔Clip the cutter to the gypsum board and push forward.
✔With strong magnetic adsorption, the upper and lower cutters cut the groove line at the same time.
✔When the gypsum board is crossed, the brake device rebounds to avoid magnetic attraction to damage the blade.
✔Finally, both hands or one hand can easily break the plasterboard along the groove line.
✔When holding the plaster cutter, be careful not to grab the bottom of the cutter with your fingers to avoid hurting your hands.